Supply Lists for Farthingales Waist Cincher Pattern

Supply Lists for Farthingales Waist Cincher Pattern

These supply lists were developed for the Farthingales downloadable waist cincher patterns. Please check the supplies for the size that you purchased. Please be aware that if you adjust the length of the corset patter these lengths may not be accurate. (you may want to print this list).

NOTE: the length of these bones and busks are based on 1/2" allowance at top and bottom edges for binding.

Waist Cincher size 18-26

  • 8" busk
  • 5" spiral bones, 1/4" (front to side front seam) 2 x 47-8000-05
  • 5  spiral bones, 1/4" wide (side seam) 2 x 47-8000-05
  • 6 1/2" spiral bones, 1/4" wide (side back to back seam) 2 x 47-8000-6.5
  • 20 cm spring steel bones, 6mm wide (next to grommets) 2 x 50-8206-20
  • 21 cm spring steel bones, 6mm wide (center back) 2 x 50-8206-21
  • half a meter of coutil will be enough but we only sell full meters
  • 2 meters of Peterham ribbon or Bias
  • 2 meters of bone casing tape 1/2" (you'll have some left over)
  • 3 meters of lacing
  • Link to the pattern that this supply list was developed for - Farthingales waist cincher pattern size 18-26

Waist Cincher size 28-36

  • 9" busk
  • 22 cm spring steel bones, 6mm wide (beside busk) optional. 2 x 50-8206-22
  • 7" spiral bones, 1/4" wide (front to side front seam) 2 x 47-8000-07
  • 6" spiral bones, 1/4" wide (middle of side front panel) optional 2 x 47-8000-06
  • 6 1/2" spiral bones, 1/4" wide (side seam) 2 x 47-8000-6.5
  • 7" spiral bones, 1/4" wide (middle of side back panel) optional 2 x 47-8000-07
  • 7 1/2" spiral bones, 1/4" wide (side back to back seam) 2 x 47-8000-7.5
  • 8" spiral bones, 1/4" wide (middle of back panel) optional 2 x 47-8000-08
  • 24 cm spring steel bones, 6mm wide (beside grommets) 2 x 50-8206-24
  • 25 cm spring steel bones, 6mm wide (center back) 2 x 50-8206-25
  • .75 meters of coutil
  • 3 meters of Petersham ribbon or Bias
  • 3-4 meters of bone casing tape
  • 3 meters of lacing
  • Link to the pattern this supply list was developed for - Farthingales waist cincher size 28-36
Waist Cincher size 38-44
  • 10" busk
  • 24 cm spring steel bones, 8mm wide (next to busk) 2 x 50-8308-24
  • 20 cm spring steel bones, 8mm wide (middle of front panel) 2 x 50-8308-20
  • 6 1/2" spiral bones, 1/4" wide (front to side front seam) 2 x 47-8000-6.5
  • 6 1/2" spiral bones, 1/4" wide (middle of side front panel) 2 x 47-8000-6.5
  • 7" spiral bones, 1/4" wide (side seam) 2 x 47-8000-07
  • 7 1/2" spiral bones, 1/4" wide (middle of side back panel) 2 x 47-8000-7.5)
  • 8" spiral bones, 1/4" wide (side back to back seam) 2 x 47-8000-08
  • 8 1/2" spiral bones, 1/4" wide (middle of back panel) 2 x 47-8000-8.5
  • 24 cm spring steel bones, 6mm wide (next to grommets) 2 x 50-8206-24
  • 25 cm spring steel bones,6mm wide (center back) 2 x 50-8206-25
  • 1 meter of coutil
  • 4 meter Petersham ribbon or Bias
  • 4 meters of bonce casing tape
  • 4 meters of lacing
  • Link to pattern this supply list was developed for - Farthingales waist cincher size 38-44

Reading next

Supply List for Under-Bust Corset Patterns by Farthingales

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.