This is a group of products offered as an alternative to grommets and to serve the same purpose. These however, are available in more colours and are not inclined to corrode regardless of moisture or perspiration. Washers are sold separately but we highly recommend the use of washers no matter what you are using the eyelets for, as they increase the strength of the hole. Our washers are made of aluminum (these will not be affected by perspiration). Eyelets will look and feel different than grommets when set. Grommets set very flat and a bit wider, eyelets set with more 3 dimensional shape and are marginally smaller in diameter. Eyelet holes are comparable to #00 grommets in size (which has a hole diameter of 5/32" (4.5 mm) when set). Eyelets and grommets cannot be set using any setter but their own ie. You cannot set an eyelet with a grommet setter at least not adequately.
Flange Diameter = 1omm (.390" or 25/64"approx.)
Length Under Flange = 4.3mm (.175" or 11/64" approx.)
Outside Diameter = 5.5mm ( .227" or 13/64" approx.)
Flange Diameter = 10mm (.390" or 25/64"approx.)
Length Under Flange = 5mm (.1875" or 3/16" approx.)
Outside Diameter = 5mm (.1875" or 13/64" approx.)