Home > Corset Making Supplies > Spiral Bones >

Bone Tipping Dies for Pliers, tips 6mm bones
Bone tipping dies for 6mm bones

Price per SET C$21.00
Deal of the Day Price: C$19.00

Product Code: 00-8006D-PL

These custom made dies are used to securely apply "U" tips to 1/4" wide corset bones.

  • These dies will tip corset bones that are 6mm or 1/4" wide both spiral bones and spring steel bones
  • These dies were designed to work with Farthingales "U" tips which are made of aluminum.
  • These dies fit Dritz snap setting pliers style (you may have some already)
  • They fit Prym Vario pliers as well
  • If you don't own a pair of these pliers you can purchase the dies with the pliers just click HERE.

Select items below and know they'll work with these dies! Farthingales cannot guarantee they will work with other sourced materials

Other items that may be of interest
hoopsteel 6mm (1/4 inch) wide x.6 mm thick Spiral Bones 1/4 inch (6mm) wide Sold by the Meter U Tips (spiral bone tips) 1/4 in (6mm) Vario Pliers by Prym
Price per Meter C$2.45
Price per Meter C$1.85
Deal of the Day Price: C$1.75
Price per Piece C$0.10
Deal of the Day Price: C$0.08
Price for One C$25.00
Deal of the Day Price: C$23.00
6mm wide hoop wire, 1/4" wide 1/4" spiral bone by the meter 6mm spiral bone tips Prym Vario Pliers

Average Rating: 4.5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
February 12, 2019
Reviewer: Miri Baker from Arlington, VA United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
repeat customer September 13, 2018
Reviewer: Hilary Sharp-Baker from Dover, NJ United States  
I had previously bought and used this excellent tool. It is great for the occasional user; if I needed to make a lot of bones (more than 20 at a time) I might invest in a bone tipping machine but for my purpose this is perfect. Unfortunately, I managed to loose mine so I had to reorder.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
work well February 21, 2018
Reviewer: Rachel Berchtold from Newmarket ON, ON Canada  
they could fit a little snugger i the vary pliers as they rotate a fair bit but for 3D printed dies they work quite well.

REPLY: the dies do move a bit in the pliers - it's a challenge to get them so they go into and out of the pliers easily and don't twist so we opted for easy in and out but having to keep them aligned by hand. They still speed up the process.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Bone tipping June 9, 2017
Reviewer: Marie-Andrée Legault from Boisbriand, QC Canada  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Probably the only easy and neat option March 30, 2017
Reviewer: Anonymous Person  
Those are good but basically just 3D printed plastic dies.  For the price, I would have thought it would be a better quality than this.  

Not sure if they will last long but they save you so much time!  They are very easy to use, no need to push hard and the end result looks great.

REPLY: The dies are indeed 3D Printed with a specific plastic - there were substantial development costs as we tested die shapes and materials. These costs are factored in to our final selling price.  If the dies were made of metal they would have been about 10 times as much - we did look into this. The 3D printing made the dies affordable and if used properly they will last for quite a few "tippings". A gentle squeeze is all that is required.

Was this review helpful to you?

View All Customer Reviews